Tech even showed up early which was appreciated. Respectful and friendly. Knew his business.
TuckerGA30084 33.84-84.2225TuckerGA30084 33.83-84.225
2 system ccm- Checked heating operations of systems. Replaced filters, checked capacitor outputs and amp drawls, triggered safety switches, cleaned flame sensors,cleaned burners, and cleared drain line. systems are operating properly at this time. 16x20x5, 16x25x5 bring every visit, 6ft ladder, pics uploaded.
Form to maintenance on two furnaces Changed out two 25 x 16 x 4 filters cleaned off flame sensors check capacitors check the amperage on fan motor and checked all electrical components everything is running normal at this time
Estimate
Wire for power and reversing valve outside were not secured secured them and heat ran normally customer also mentioned unit would not shut off watched cycle unit turned on and off twice performing normally.
Completed 2 system ccm on two gas furnaces located in attic i checked thermostat operations and checked gas pipe and exhaust pulled and cleaned flame sensors checked capacitor mfd cleared pressure tubes, did not change filters they were good at this time, inspected overall cleanliness of both cabinets and blowers as well as burners and inside heat exchangers I watched furnaces cycle got inducer amps and blower amps systems performing how they should at this time
I performed a heating maintenance on three gas furnaces Ac units I replaced one 20x25x1 and one 14x25x1 and one 16x20x1 filters I checked all electrical components and checked the temp rises and checked the heat exchangers and checked the gas pressures and checked and cleaned the flame sensors two of the units are in good working order but the one in the ceiling needs to be replaced it did not come on at at all after checking everything on it is a very old unit and it is an R22 unit I highly recommend replacing it soon. Please let us know ASAP to have a comfort consultant come and give you a quote on replacing the unit in the ceiling.
The system was low of Freon one pond under warranty
I performed a heating maintenance on a single gas furnace Ac unit I replaced the 20x20x4 filter homeowner supplied I checked all electrical components and checked the temp rise and checked the heat exchangers and checked and cleaned the flame sensor and checked and adjusted the gas pressures everything is in good working order at this time.
I performed a heating maintenance on a single gas furnace Ac unit I replaced the 20x25x1 filter I checked all electrical components and checked the temp rise and checked the heat exchangers and checked and cleaned the flame sensor and checked the gas pressures everything is in good working order at this time.
I performed a heating maintenance on one gas furnace Ac unit I replaced the 16x25x5 filter homeowner supplied I checked all electrical components and checked the temp rise and checked the heat exchangers and checked the gas pressures and checked and cleaned the flame sensor and checked the mini split everything is in good working order at this time.